All Posts

GSM Roller Shutter Remote Control Board with Dead-Man Operation

Switching off Mobile Phone Voice-mail Call Diverts using GSM Network Codes

PAYG or Contract SIM for Alpha GSM Gate Opener

What is the maximum voltage for the optical input on the Alpha GSM Alarm Dialer?

4G Long Term Evolution LTE Bands

SIM Card Selection for GSM Gate Openers and Auto-Dialers

Alpha GSM Pulse or Toggle and Call Handling Question

New website new blog

2 thoughts on “All Posts

  1. jgreenpenrith

    Hi Michael,
    How do I activate the relay on my dialer board, by activating the Input A.
    At the moment I activate the relay by making a call to the unit. I would rather the relay made when the input is activated.

    1. adventcontrols Post author

      Hi John,

      To activate the output, as per a telephone call, using input A you send the message:

      exit enable

      You can connect an exit switch to input A to use the board as a full access control system which is what the command was originally intended for. However it can be used for any purpose. With this enabled any trigger on input A is seen as a telephone call from a recognised number.

      Thanks for your question,



Leave a Reply

Fill in your details below or click an icon to log in: Logo

You are commenting using your account. Log Out /  Change )

Google photo

You are commenting using your Google account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s